Fireye 85IRF series, Руководство пользователя

Страница: 18 / 30

18

BASIC SET UP PROCEDURE/LED INDICATION
TASK ACTIONS LED STATUS
Flame
Strength
(8)
Ready Flame
On/Off Learn
Target
Flame
Learn
Background
Flame
RUN (none) All Active ON Active OFF OFF
Enter
Password Simultaneously depress:
Target Flame Select and
Background Flame Select
buttons, then release
Disabled ON Active ON ON
Depress and release: UP
button five times
5th ON ON Active ON ON
Accept
Password Simultaneously depress:
Target Flame Select and
Background Flame Select
buttons, then release
5th ON FLASH Active FLASH FLASH
Aim
Scanner Depress and hold*:
Target Flame Select button
Adjust scanner alignment for
flame maximum signal then
secure scanner position.
All Active FLASH ON
*(RF is energized if
Target Flame Select
button is held)
ON OFF
Learn
Target
Flame Depress and release:
UP or DOWN button while
holding
Target Flame Select button*
All Active FLASH ON
*(RF is energized if
Target Flame Select
button is held)
FLASH OFF
Learn Target Flame completed All Active ON Active OFF OFF
Learn
Background
Flame
(if required) Enter and Accept Password as
described above 5th ON FLASH Active FLASH FLASH
Depress and release:
Background Flame Select
button
All Active FLASH
Active
OFF ON
Learn Background Flame
completed All Active ON Active OFF OFF
RUN (none) All Active ON Active OFF OFF
*WARNING: Depressing and holding the “Target Flame Select” button during the AIM
and Learn Target Flame procedures will keep the flame relay contacts closed, allowing the
burner to operate without bypassing the burner management system input.
During this process you must visually confirm that the flame is present.
Only when the “Target Flame Select” button is released will the flame relay status be
determined by the actual flame signal strength