manualshive.com logo in svg

Fire-Lite Alarms UDACT-F, Инструкция по установке, эксплуатации и программированию

Поделиться
Скачать
Fire-Lite Alarms UDACT-F Скачать руководство пользователя страница 26

26

  Document # 50049  Rev D   5/2/97  P/N 50049:D

Valid entries for both the primary and secondary phone numbers are 0 - F with the
numeric digits as dialed numbers and hexadecimal digits (A-F) representing the
following functions:

A= * on a Touchtone phone keypad

B= # on a Touchtone phone keypad

C= look for secondary dial tone for up to 2 seconds (then, dial anyway)

D= 3-second pause

E= 5-second pause

F= end of phone number (Note: F must be entered)

Primary Number Communication Format (16)
One location is needed to select the Communication Format to the primary phone

number. Address 16 is used for this purpose. The default (factory setting) for this

address is 16_A, which is 4+2 Standard, 1800 Hz 'Carrier', 2300 Hz 'ack'. You may

enter 0, 1, 2, 4, 6, 8, C or E in place of the default, then press 

[ENTER/STORE]

.

Choose from the list of formats below:

0: 4+1 Ademco Express Standard, DTMF, 1400/2300 ACK

1: 4+2 Ademco Express Standard, DTMF, 1400/2300 ACK
2: 3+1 Standard 1800 Hz Carrier, 2300 Hz ACK
3: Not Used
4: 3+1 Standard 1900 Hz Carrier, 1400 Hz ACK
5: Not Used
6: 4+1 Standard 1800 Hz Carrier, 2300 Hz ACK
7: Not Used
8: 4+1 Standard 1900 Hz Carrier, 1400 Hz ACK
9: Not Used
A: 4+2 Standard 1800 Hz Carrier, 2300 Hz ACK
B: Not Used
C: 4+2 Standard 1900 Hz Carrier, 1400 Hz ACK
D: Not Used
E: Ademco Contact ID
F: Not Used

Note: Consult your Central Station for proper selection or consult our factory
representatives. For any format chosen, the UDACT-F automatically
programs all of the event codes. See Tables 3-2, 3-3, 3-4, 3-5, 3-6 and 3-7.

Primary Number Account Code (17-20)  Four locations at addresses 17-20 default to
all '0's.

 

Valid entries are (0-9 and A-F). The number of digits entered must match the

format selection. If programming '2 or 4' into address 16, enter 3 digits. (location 20 is
ignored) If programming '0, 1, 6, 8, A, C, or E' into address 16, enter 4 digits.

Primary Number 24 Hour Test Time (21-24).
Use military time when entering the 24 hour 'test' time. The 24 hour test report to
phone number 1 takes up four locations, from addresses 21-24. The default is 00:00
(12:00 midnight). The limits for each location are as follows:  21: enter 0, 1 or 2;  22:
enter 0-9; 23 : enter 0-5; 24: enter 0-9. Note: Do not use A-F.

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Содержание UDACT-F

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды