START-UP AND OPERATION INSTRUCTIONS
I115SS
Rev. 001
22/12/2014
20/58
4. START-UP AND OPERATION INSTRUCTIONS
4.1. TRANSPORT AND HANDLING
The machine is delivered to the purchaser without any packaging and tied with straps. The side brushes and
scrubbing brushes are removed before transport to prevent any damaging.
Upon customer request, the machine can be packaged on a special pallet.
The purchaser should check upon delivery that the machine has not been damaged during
transport and that all the material listed in the transport documentation has been received;
otherwise, the forwarders and manufacturer should be promptly informed.
Unless otherwise agreed, purchased goods will travel at the purchaser's own risk.
Handling must be carried out as follows:
TYPE OF PACKAGING
HANDLING EQUIPMENT
FIG.
Pallet
Fork lift truck
N. 4.1
None
The machine should be handled with a fork lift truck/overhead
crane with a two-strap balance harness.
N. 4.2
The harness straps used must be suitable for the load to lift. Handling operations
should be carried out at very slow speed to prevent load swinging and loss of
stability. Any operation performed incorrectly may damage the machine and expose
operators to dangers.
Refer to point 2.3 for machine dimensions and weight. Machine handling should be
carried out by authorised personnel trained for lifting equipment use only.
LOADING DIAGRAM
FIGURE 4.1
FIGURE 4.2
