MAINTENANCE
I115SS
Rev. 001
22/12/2014
40/58
To replace the right-hand and left-hand splash guards, loosen the 7 screws as shown in figure 4.27; by
loosening the 3 screws in the slot, height can be adjusted, too (detail 1 figure 4.27).
4.7.10 SQUEEGEE REPLACEMENT
The squeegee blades must be replaced when the edges become worn; the blade edges must be sharp to
ensure perfect drying.
To replace the squeegee proceed as follows:
Remove the squeegee from the machine by loosening the screw in figure 4.28 and place it on a
workbench or leave it on the floor (figure 4.29)
Loosen the strip by turning the lever (fig. 4.30/ 31) and screw out the two side wing nuts (fig. 4.32)
Remove the steel strips (fig. 4.33)
Perform the same operations in reverse order to fit new blades then adjust the squeegee (fig. 4.34).
FIGURE N° 4.28
FIGURE N° 4.29
1
FIGURE N° 4.27
