MAINTENANCE
I115SS
Rev. 001
22/12/2014
39/58
4.7.9 SCRUBBING BRUSHES AND SPLASH GUARD REPLACEMENT.
Proceed as follows to replace the scrubbing brushes:
remove the key from the dashboard to prevent unwanted ignition after moving the plate all the way
out by pressing the button on the panel (detail 1 figure 4.26);
open the metal skirting panel (detail 2 figure 4.26);
loosen the right-hand guard knobs (part 3 figure 4.26);
turn the right-hand brush until the release pin becomes visible (detail 4 figure 4.26);
remove the brush;
to install a new brush, ensure that it is in line with the coupling axis then firmly push it up;
pull in the plate, open the left-hand guard and repeat the previously performed operations;
after fitting the brushes, re-install the guards;
Before restarting the machine, ensure that the protective guards have been correctly
replaced.
FIGURE 4.26
2
1
3
4
