MAINTENANCE
I115SS
Rev. 001
22/12/2014
33/58
4.7.7 WATER DRAINING, CONE FILTER CLEANING AND WASTE BOX EMPTYING
Waste water draining:
hold the pipe (figure 4.12) and lift it just slightly to free it from its support, then place
it over a sewer hole. Undo the cap; after draining completion, replace the cap and place the pipe back in its
support.
Recovery tank cleaning:
carry out recovery tank cleaning by using the drain located in the bottom right
corner on the back of the machine (figure 4.13):
pull down the chute (figure 4.13)
place a large container under it or park the machine near a sewer hole
perform these operations in reverse order to complete the process.
Before opening the recovery tank draining cap, ensure that water has been drained through
the pipe (fig.4.12).
FIGURE 4.12
FIGURE 4.13