GENERAL INFORMATION
I115SS
Rev. 001
22/12/2014
4/58
1. GENERAL INFORMATION
1.1.
SYMBOLS USED
This symbol is used to alert the operator to important
procedures or precautions to be
followed in order to prevent damages to users or the machine
This symbol is used to alert the operator to important general information.
1.2. NOTES
1.3. CONSULTING THE MANUAL
This manual deals exhaustively with all the issues considered necessary for an easy and safe use of the
machine, in compliance with European Directives on product safety.
We therefore suggest to all authorised operators to carefully read this manual throughout and
contact FIORENTINI S.p.A. in case of any doubt. This manual should also be used for reference
whenever there are doubts concerning a procedure or operation to carry out or to train new
operators.
In print, pictures and drawings can look slightly different from actual machine parts, without however being
perceived as confusing.
Special symbols and
bold
and/or
Italic
fonts are used to highlight important information, particularly
concerning safety.
The current revision code is indicated in the bottom left corner of every page. The list of revised pages is
shown at the end of the manual.
1.4. WARRANTY
Warranty terms and conditions are stated here below unless otherwise specified in the order confirmation.
SCOPE OF THE WARRANTY
The machine has been designed and built for trouble-free use over several years. However, if any
malfunctioning is observed during the warranty period, FIORENTINI S.p.A. undertakes to repair or replace
free of charge any parts showing breaks or early wear due to faulty materials, working defects or incorrect
assembly. The manufacturer warranty will not cover any parts whose early breaking or wear-and-tear are caused
by:
This manual is the property of
FIORENTINI S. p. A.
The reproduction of all or part of this manual or its transmission to third parties by any
mechanical or electronic system or otherwise is forbidden without a written authorisation
by the manufacturer. This manual is supplied to the customers in a single original copy
unless otherwise specified at the time of ordering.
This manual is supplied as an integral part of the machine and if the machine is transferred to a new owner,
this manual should also be transferred. This manual should be stored at a safe location throughout the
machine working life. The purchaser is responsible for making this manual available to all users. If this manual
is lost, a duplicate should be obtained from FIORENTINI.
FIORENTINI S.p.a. will not be held responsible for any damages to persons and/or property resulting from
failure to comply with the instructions in this manual.
FIORENTINI reserves the right to introduce any required technical and commercial changes without giving
any notice. Therefore, any data and information contained in this manual may be changed and/or updated.
