MAINTENANCE
I115SS
Rev. 001
22/12/2014
48/58
5.3
ENGINE MAINTENANCE (Diesel/Gas versions)…………………………………
5.3.1 ENGINE REMOVAL
In order to make the machine IC engine maintenance operations easier, a system has been created enabling
to partly remove it from the machine.
Remove the engine from the machine by following these instructions:
Remove the 2 M12 screws fixing the engine to the frame (detail 1 figure 5.1) and disconnect the feed
yoke (detail 2 figure 5.1) (both parts can be accessed from the cover located under the seat on the
right side of the machine);
Lift the top cover (detail 2 figure 5.2), open the left-hand side partition and remove the lower closure
(detail 1 figure 5.2);
Disconnect the air inlet hose from the air filter (figure 5.3);
Remove the engine (figure 5.4);
To reinstall the engine, reverse the order of the above operations
FIGURE 5.1
2
1
1
FIGURE 5.2
1
2
FIGURE 5.3
