MAINTENANCE
I115SS
Rev. 001
22/12/2014
36/58
4.7.8
SWEEPING BRUSHES REPLACEMENT AND MAINTENANCE
Centre brush replacement:
open the right-hand side guard through the release hinge (fig. 4.16)
screw out the 4 wing nuts fixing the rubber dust seal stop plate (figure 4.17).
remove the stop plate and take out the rubber dust seal. (fig. 4.18)
loosen the screw (detail 1, figure 4.19) and open the brush support guard (fig. 4.19)
remove the brush (detail 1 figure 4.20)
replace the brush checking that it is inserted in the driving flange pins on the opposite side (detail 1
figure 4.18)
now repeat the disassembly operations described here above in reverse order.
2
1
FIGURE 4.16
FIGURE 4.17
FIGURE 4.18
FIGURE 4.19
