10-92
Installing instructions
•
Remove the handle from the ma-
chine by unscrewing the screws on
both sides.
(see fig.
10.4.3-26
)
•
Disconnect the connector of the
handlebar
microswitch
from
the
electrical system (Being careful to
keep the connector outside of the
electrical system compartment)
(see fig.
10.4.3-27
)
.
10.4.3-26 Handlebar
re-
moving
10.4.3-27 Connector
•
Remove the Function Dashboard
(see
section
4.1.2
at page
17
)
•
Remove the Rear Dashboard
(see section
4.1.6
at page
18
)
10.4.3-28 Extensions in-
stallation
•
Fit the two extensions to the solu-
tion tank with the two screws 5x12
passing in the two respective lower
holes. (Pull the connector through
the lower large hole of the exten-
sion)
(see fig.
10.4.3-28
)
.
•
On the handlebar, enlarge the hole
under in the connector’s side, bring-
ing it to 14 diameter.
•
Pass the connector through the en-
larged hole
(see fig.
10.4.3-29
)
.
•
Reconnect the connector of the han-
dlebar microswitch to the electrical
system.
•
Pulling gently, accompany the con-
nector inside the electrical system
compartment
(see fig.
10.4.3-30
)
.
•
Install the handle to the supports
with the screws included in the kit
(see fig.
10.4.3-31
)
.
10.4.3-29 Enlarged hole
10.4.3-30
Connector
pulling
10.4.3-31 Handlebar
in-
stallation
•
Restore the Rear Dashboard.
•
Restore the Function Dashboard.
Содержание IMx
