Fimap IMx, Руководство по ремонту, Страница: 23 / 94

4-23
•
Loose the nut that blocks the Func-
tion Dashboard.
• Remove the Potentiometer.
(see fig.
4.1.4-4 )
.
• Proceed at reverse to refit the part.
4.1.4-4
4.1.5 Power Card IMx B/BT
• Put the machine in safe conditions.
• Remove the Function Dashboard
(see
section 4.1.2 at page 17 )
• Remove the Rear Dashboard
(see section
4.1.6 at page 18 )
• Unplug all the wires and cables con-
nected to the Power Card.
• Loose the screws that block the
Power Card on the Machine
(see fig.
4.1.5-5 )
.
• Proceed at reverse to refit the part.
4.1.5-5
4.1.6 Rear Dashboard IMx
B/BT
•
Put the machine in safe conditions.
• Tilt the machine to let the brush
deck to touch the floor.
• Low the Squeegee on the floor
(see fig.
4.1.6-6 )
• Remove the Squeegee Command
Lever
(see fig. 4.1.6-7 )
,
(see section 4.3.12 at page
31 )
.
• Unplug the Vacuum Hose
(see fig. 4.1.6-8 )
•
Unhook the Drain Hose from its Clip
(see fig. 4.1.6-8 )
.
•
Remove the Function Dashboard
(see
fig.
??
)
.
•
Loose the screws that block the Rear
Dashboard to the machine
(see fig. 4.1.6-
9 ) (see fig. 4.1.6-10 )
.
• Unplug all the wires and cables that
connect the electrical devices on the
Rear Dashboard.
•
Remove the Rear Dashboard
(see fig.
4.1.6-11 )
.
•
Proceed at reverse to refit the part.
4.1.6-6 4.1.6-7