Fimap IMx, Руководство по ремонту, Страница: 31 / 94

4-31
4.3 Drying System
4.3.1 Squeegee
• Put the machine in safe conditions.
•
Lower the Squeegee in working con-
ditions.
• Unplug the Vacuum Hose
(see fig. 4.3.1-
43 )
.
• Loose the knobs that block the
Squeegee to the Squeegee Support
(see fig. 4.3.1-43 )
.
•
Remove the Squeegee from the
Squeegee Support
(see fig. 4.3.1-44 )
.
• Proceed at reverse to refit the part.
• Perform the adjustment procedure
for the Squeegee
(see section 7.3.1 at page 68 )
.
Note: The Squeegee has to be refit on the
machine with the washers on the upper
part of the Squeegee Support
(see fig. 4.3.1-
45 )
.
4.3.1-43 4.3.1-44
4.3.1-45
4.3.2 Squeegee Adapter
• Put the machine in safe conditions.
• Disassemble the Squeegee from the
Machine
(see section 4.3.1 at page 26 )
.
• Loose the knobs that block the
Squeegee to the Squeegee Support
(see fig. 4.3.2-46 )
.
• Remove the Squeegee Adapter.
• Proceed at reverse to refit the part.
4.3.2-46
4.3.3 Squeegee Support
• Put the machine in safe conditions.
• Disassemble the Squeegee from the
Machine
(see section 4.3.1 at page 26 )
.
• Be sure that the Squeegee Com-
mand Lever is in lower position.
• Unscrew the screw that fix the chain
to the Squeegee Command Lever and
let it lie behind the Squeegee Sup-
port
(see fig. 4.3.12-75 )
.
•
Loose the nuts that block the Gas
Spring to the Squeegee Support and
Remove the Gas Spring
(see fig. 4.3.3-49 )
.
• Loose the screws that block the
Squeegee Support to the Squeegee
Rotation Arm
(see fig. 4.3.3-50 )
.
• Remove the Squeegee Support
(see fig.
4.3.3-51 )
.