Fimap IMx Скачать руководство пользователя страница 64

Страница: 64 / 94

5-64

Traction Sets

Parameter

Default

Min

Max

Description

Traction Sets:
Acc Ramp: #.# [s]

3.5

0.5

5.0

Acceleration ramp. The time necessary to arrive at the maximum
speed.

Traction Sets:
Dec Ramp: #.# [s]

1.0

0.5

5.0

Deceleration ramp. The time necessary to stop the machine when the
safety lever is released.

Traction Sets:
Rev Ramp: #.# [s]

1.0

0.5

5.0

The time necessary to invert the way.

Traction Sets:
FW Speed: ### [%]

100

Maximum speed in forward way (expressed in %).

Traction Sets:
BW Speed: ### [%]

100

Maximum speed in reverse way (expressed in % respect the maximum
speed in forward way).

Traction Sets:
Min Speed: ### [%]

Minimum speed when the safety lever is pressed.

Traction Sets:
Ref 0: #.# [V]

0.5

0.0

5.0

Minimum voltage of the potentiometer when released.

Traction Sets:
Ref FW: #.# [V]

12.0

0.5

13.0

Maximum voltage of the potentiometer in forward speed when safety
lever is pressed.

Traction Sets:
Ref BW: ## [V]

12.0

5.5

15.0

Maximum voltage of the potentiometer in backward speed when safety
lever is pressed.

Traction Sets:
Ref DB: 0.### [V]

0.200

0.000

0.500

Potentiometer dead band

Traction Sets:
Brake Del: #.# [S]

0.0

10.0

Engaging time of electronic brake when the machine is stop - NOT
USED.

Traction Sets:
Mode1 V: ## [%]

100

Maximum speed reduction with the input Mode 1 activated - NOT
USED.

Traction Sets:
Mode1 I: ## [Amp]

Motor Current limit with the input Mode 1 activated - NOT USED.

Traction Sets:
Runaway: ### [Volt]

Parameter not managed.

Traction Sets:
optional3: ##

Parameter not managed.

Traction Sets:
optional2: ##

Parameter not managed.

Traction Sets:
optional1: ##

Parameter not managed.

Traction Sets:
I Max: ## [Amp]

Maximum output from the main card to the traction motor.

Traction Sets:
I Nom: ## [Amp]

Rated Current; with T

Nom detect the amperometric protection

threshold. (Alarm + stop traction motor).

Traction Sets:
T Nom: ## [s]

Rated Timer; with I Nom detect the amperometric protection thresh-
old. (Alarm + stop traction motor).

Содержание IMx































































































Результаты поиска

Содержание IMx

Отзывы:

Fimap IMx, Руководство по ремонту, Страница: 64 / 94

Результаты поиска

Содержание IMx

Отзывы: