Fimap IMx, Руководство по ремонту, Страница: 40 / 94

4-40
4.5 Solution Delivery Sys-
tem
4.5.1 Solution Tank
• Put the machine in safe conditions.
• Remove the recovery tank.
(see section
4.3.7 at page 28 )
• Disconnect the water supply hose
from the solenoid valve.
•
Loosen the screws securing the so-
lution tank to the scrubdeck
(see fig.
4.5.1-88 ) (see fig. 4.5.1-89 )
.
•
Remove the solution tank from the
machine frame
(see fig. 4.5.1-90 )
.
• Loosen the screws of the battery
compartment and remove it from the
tank
(see fig. 4.5.1-91 )
.
• Remove the Support plate unscrew-
ing the fixing screws.
(see fig. 4.5.1-92 )
•
Remove the brush/squeegee holder,
by unscrewing the fixing screws
(see
fig. 4.5.1-93 )
•
Remove the object holder and un-
screw the screw on the magnet.
(see
fig. 4.5.1-94 )
•
Remove the solution filter
(see section
4.5.3 at page 36 )
• Remove the water control Valve
Group
(see section 4.5.4 at page 36 )
.
• Remove the hose connector and its
fastening clamp
(see fig. 4.5.1-95 )
•
Remove the parking brake (ONLY BT
VERSION)
(see section 4.4.6 at page 34 )
• Remove the vacuum motor
(see section
4.3.10 at page 29 )
•
Remove the vacuum motor lower
carter.
• Proceed at reverse to refit the part.
4.5.1-88 4.5.1-89
4.5.1-90 4.5.1-91
4.5.1-92 4.5.1-93
4.5.1-94 4.5.1-95