Fimap IMx, Руководство по ремонту, Страница: 53 / 94

5-53
Advanced Menu
The Advanced Menu can be reached
from the “operator menu” by accessing
the “password” parameter and setting
the value
60 .
Change a Parameter (in the Advanced
Menu)
To change the value of a parameter, pro-
ceed as follows:
• Scroll through the submenus with
the buttons “4” and “6”.
• Select the submenu that contains
the parameters to be changed using
the button “3”.
• Scroll through the parameters with
the buttons “4” and “6” to find the
parameter to be edited.
• Select the parameter with the button
“3”.
• Use the buttons “4” and “6” to scroll
through the list of available values of
the parameter.
• Confirm the new value of the param-
eter using the button “3”.
• To enable the changes, it is neces-
sary to return to the “menu work”;
to exit the parameters and return to
the “Advanced Menu” press simul-
taneously the buttons “4” and “6”,
then find the sub-menu “Exit” and
confirm with button “3”.
Parameters Reset
Some parameters of the Advanced Menu
(Brushes Sets, Pumps Sets, Vacuum
Sets, Traction Sets) can be restored to
the factory setting. To reset the parame-
ters follow the procedure below:
• In the “Operator Menu” go to the
“password” parameter setting the
value
11 without confirming.
• Press the button “5”.
•
The password becomes “0”.
The procedure was successful, now the
default values of brushes, pumps, suc-
tion, traction, have been uploaded.
Check/Monitor Function
It is possible to view all the values of the
Check/monitor function during the nor-
mal work of the machine. To view the
values, following the instruction:
• Turn OFF the machine
•
Press in the same time, the buttons
“3”, “4” and “6”
•
Until the buttons are pressed, turn
ON the key and wait the upload of
the “working menu”
• Use the buttons “4” or “6” to select
the submenu “password”
• Confirm pressing button “3”
• Press button “4” or “6” until to select
the password “60”
• Confirm the password by pressing
the button “3” to enter into the “ad-
vanced menu”
•
Press the button “4” or “6” to select
the menu “Check/Monitor”
•
Confirm by pressing the button “3”