background image

MANUAL MODE (PRO VERSION)

To change from the "ECO MODE" or from the "PROGRAM ZONE" mode to the "MANUAL MODE", 

simply change one of the following parameters:

1.  Quantity of detergent solution present in the machine's water system (see “

ADJUSTING THE 

DETERGENT SOLUTION FLOW (PRO VERSION)

”).

2.  Forward speed level of the machine (see “

ADJUSTING THE FORWARD MOVEMENT SPEED 

(PRO VERSION)

”).

3.  Suction motor performance level (see “

SILENT-MAX FUNCTION (PRO VERSION)

”).

4.  Level of pressure exerted on the brush head (see “

EXTRA BRUSH HEAD BRUSH PRESSURE (PRO VERSION)

”).

N.B.:

 When the "MANUAL MODE" is active in the control display the symbol (1) relative to the "ECO MODE ACTIVE" function will 

disappear.(

Fig.1

).

1

1

MANUAL MODE (PLUS VERSION)

To activate the MANUAL-MODE program, proceed as follows:

1.  Sit on the driver’s seat.

2.  Insert the key (1) into the main switch on the control panel. Set the main switch to "I" (

Fig.1

).

3.  Using the DS selector (2), select the working program you want; see “

DS SELECTOR (DRIVE SELECT)

” (

Fig.2

).

N.B.:

 by selecting one of the three working programs on the DS selector, ECO-MODE will be automatically activated.

4.  Deactivate ECO-MODE by pressing the button (3) at the centre of the DS selector (

Fig.2

); the display will move from ECO-MODE (Fig.2) to 

MANUAL MODE (

Fig.3

).

N.B.:

 the grey ECO-MODE key means that the eco mode is not active. The green ECO-MODE key means that the eco mode is active. In 

addition, when ECO-MODE is not active, on the text indicator row (4) on the display, the word "MANUAL” will appear (

Fig.2

).

5.  Press the drive pedal (5) to begin moving the machine (

Fig. 4

).

N.B.:

 if the button (3) (

Fig.2

)is pressed when working in MANUAL MODE, the machine will shift to ECO-MODE, leaving the program in 

use at the time active.

N.B.:

 if the "ZONE" button (6) is pressed when working in MANUAL MODE, the machine will shift to PROGRAM ZONE mode; as soon as 

button (6) is pressed, the screen enabling you to select the working zone will appear on the display (

Fig.5

).

In manual mode the visible buttons are:

A. 

Water flow selector

B.  Suction motor performance level.

C.  Pressure level exercised on the central brush head.

D.  Maximum forward movement speed level.

N.B.:

 the four keys are always present but can be selected depending on the working mode selected.

Particularly:

•  Transfer: the visible button will be that of the maximum speed.

• 

Scrubbing without drying: the buttons visible will be those of the maximum speed, the water flow selector and the pressure exercised 

on the central brush head.

•  Drying: the buttons visible will be those of the maximum speed and the suction motor performance level.

• 

Scrubbing with drying: the buttons visible will be those of the maximum speed, the water flow selector, the pressure exercised on the 

central brush head and performance level of the suction motor.

N.B.:

 the disabled buttons and the respective indicators are grey.

N.B.:

 each time one of the enabled keys is pressed, it increases the relative level in a cyclical manner. Only the detergent solution 

adjustment permits zero level.

 

N.B.:

 to activate or deactivate “MANUAL ZONE” mode, see the programming manual.

ECO mode

0000.00

100%

3

2

4

6

2

1

1

MANUAL

0000.00

100%

3

D

A

C

B

4

Warehouse

Canteen

Office

Reception

Exit

SELEZIONE ZONE

0000.00

100%

5

5

28

Содержание BMg 50 Orbital





















































Отзывы: