MACHINE
CODE
QTY
TYPE OF
BRISTLE
NOTES
BMg 56 B
436232
1
PPL Ø0,3
BRUSH Ø560mm Ø22in (LIGHT BLUE)
436233
1
PPL Ø0,6
BRUSH Ø560mm Ø22in (WHITE)
436234
1
PPL Ø0,9
BRUSH Ø560mm Ø22in (BLACK)
436235
1
ABRASIVE
BRUSH Ø560mm Ø22in
436236
1
-
PAD HOLDER Ø535mm Ø21in
BMg 65 B
422189
2
PPL Ø0,3
BRUSH Ø340mm Ø13.4in (LIGHT BLUE)
422971
2
PPL Ø0,6
BRUSH Ø340mm Ø13.4in (WHITE)
422972
2
PPL Ø0,9
BRUSH Ø340mm Ø13.4in (BLACK)
422981
2
ABRASIVE
BRUSH Ø340mm Ø13.4in
422973
2
-
PAD HOLDER Ø320mm Ø12.6in
BMg Orbital
442005
1
PAD 508x355mm 20x14in (RED)
442661
1
PAD 508x355mm 20x14in (GREEN)
442662
1
PAD 508x355mm 20x14in (BLACK)
443711
1
PAD 508x355mm 20x14in (WHITE)
443712
1
PAD 508x355mm 20x14in (BROWN)
CHOOSING AND USING BRUSHES
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 50°C.). PPL is non-hygroscopic and therefore
retains its characteristics even when working in wet conditions.
ABRASIVE BRUSH
The bristles of this type of brush are charged with highly aggressive abrasives. It is used to clean very dirty floors. To avoid floor damage, work
only with the pressure strictly necessary.
BRISTLE THICKNESS
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On uneven floors or those with deep joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and clean deep
down. In this case, like with over-large bristles, the brush tends to jump.
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holder:
•
The traditional pad holder is fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while working.
• the CENTRE LOCK type pad holder not only has anchor points, but also a snap-type central locking system in plastic that allows the
abrasive floor pad to be perfectly centred and held without any risk of it becoming detached. This type of pad holder is recommended above
all for machines with more than one brush, where the centring of the abrasive discs is difficult.
RED PAD
Suitable for frequent use on relatively clean floors. Even cleans without water, and polishes by removing marks.
GREEN PAD
Suitable for removing surface layers of wax and for preparing the flooring for subsequent treatments. For wet use.
BLACK PAD
Suitable for wet scraping heavy layers of wax. Removes the old finish, and eliminates burrs in concrete.
WHITE PAD
Suitable for finishing treated floors and for shiny polishing. Use dry or slightly damp.
BROWN PAD
Suitable for wet or dry scraping with wax removers. Prepare the floor for new waxing. Resistant to acids.
45
