N.B.:
If it is necessary to turn on the low beam headlights while working, see “
WORKING HEADLIGHTS (PLUS VERSION)
”.
ATTENTION: never switch off the machine while the squeegee and/or brush head is in contact with the floor
ADDITIONAL FUNCTIONS
ECO MODE (PRO VERSION)
At the centre of the control panel is the ECO MODE button; pressing this will activate “ECO MODE”, a program which guarantees the best
possible performance in terms of consumption and cleaning. To activate the ECO-MODE program, proceed as follows:
1. Sit on the driver’s seat.
2. Insert the key (1) into the main switch on the control panel. Set the main switch to "I" (
Fig.1
).
3. Select the ECO-MODE working program with the button (2) at the centre of the control panel (
Fig.2
).
N.B.: As soon as the button (2) in the control display is pressed, the "ECO-MODE ACTIVE" symbol (3) will appear (
Fig.3
).
4. Press the drive pedal (4) to begin moving the machine (
Fig.4
).
N.B.: to activate the ECO-MODE function, you can also press, with the transfer working program active, the "BRUSH HEAD CONTROL"
button (6) or the "SQUEEGEE CONTROL" button (7) (
Fig.2
). Pressing one of the two buttons will switch from the transfer program to the
relative program selected, and the symbol (3) will appear in the control display.
2
3
6
3
5
7
2
1
1
4
4
ECO MODE (PLUS VERSION)
At the centre of the DS selector is the ECO MODE button; pressing this will activate “ECO MODE”, a program which guarantees the best
possible performance in terms of consumption and cleaning. To activate the ECO-MODE program, proceed as follows:
1. Sit on the driver’s seat.
2. Insert the key (1) into the main switch on the control panel. Set the main switch to "I" (
Fig.1
).
3. Select the ECO-MODE working program with the button (2) at the centre of the DS selector (
Fig.2
).
N.B.:
the grey ECO-MODE key means that the eco mode is not active. The green ECO-MODE key means that the eco mode is active. In
addition, when ECO-MODE is active, on the text indicator row (3) on the display, the words “ECO mode” will appear (
Fig.2
).
N.B.:
pressing the button (2) on the DS selector (
Fig.2
) will activate the SCRUBBING WITH DRYING program. If you wish to use another
working program, select it using the DS selector (read the section “
”).
4. Press the drive pedal (4) to begin moving the machine (
Fig. 3
).
N.B.:
if the button (2) is pressed when working in ECO-MODE, the machine will shift to MANUAL MODE, leaving the program in use at
the time active (
Fig.4
).
N.B.:
if the "ZONE" button (4) is pressed when working in ECO-MODE, the machine will shift to PROGRAM ZONE mode (
Fig.2
); as soon
as button (4) is pressed, the screen enabling you to select the working zone will appear on the display (
Fig.5
).
ECO mode
0000.00
100%
2
5
3
2
1
1
MANUAL
0000.00
100%
4
3
4
Warehouse
Canteen
Office
Reception
Exit
SELEZIONE ZONE
0000.00
100%
5
27
