FFC V-Snow Blade, Руководство оператора

Страница: 8 / 47

8
EQUIPMENT SAFETY PRECAUTIONS
Operating the V-Snow Blade:
•Do not exceed the lifting capacity of your prime mover.
•Operate only from the operator’s station.
•When operating on slopes, drive up and down, not across. Avoid steep hillside operation
which could cause the prime mover to over turn.
•Reduce speed when driving over rough terrain, on a slope, or turning to avoid overturning
the vehicle.
•An operator must not use drugs or alcohol, which can change his or her alertness or
coordination. An operator taking prescription or over-the-counter drugs should seek
medical advice on whether or not he or she can safely operate equipment.
•Before exiting the prime mover, lower the attachment to the ground, apply the brakes, turn
off the prime mover’s engine and remove the key.
Transporting the V-Snow Blade:
•Travel only with the attachment in a safe transport position to prevent uncontrolled
movement. Drive slowly over rough ground and on slopes.
•When driving on roads use safety lights, reflectors, Slow Moving Vehicle signs etc. to
prevent accidents. Check local government regulations that may affect you.
•Do not drive close to ditches, excavation, etc. cave in could result.
Maintaining the V-Snow Blade:
•Before performing maintenance (unless otherwise specified) lower the attachment to the
ground, apply the brakes, turn off the engine and remove the key.
•Never perform any work on the attachment unless you are authorized and qualified to do
so. Always read the operator service manual’s before any repair is made. After completing
maintenance or repair, check for correct functioning of the attachment. If not functioning
properly, always tag “DO NOT OPERATE” until all problems are corrected.
•Worn, damaged or illegible safety decals must be replaced. New safety decals can be
ordered from FFC.
•Never make hydraulic repairs while system is under pressure. Serious personal injury or
death could result.
•Never work under a raised attachment.