FFC V-Snow Blade, Руководство оператора

Страница: 10 / 47

10
WARNING! Improper attachment of V-Snow Blade could result in injury or death. Do not operate
this machine until you have positive indication that the attachment is securely mounted.
1. Position the blade on a level surface.
2. Enter the prime mover.
3. Fasten the safety restraints.
4. Start the engine.
5. Disengage the parking brake.
6. Align the attachment mechanism with the mounting on the blade and attach it to the prime mover.
Follow the attaching procedure in the prime mover owner’s manual.
7. Engage the parking brake and shut down the prime mover. Relieve all pressure to the auxiliary
hydraulic lines.
8. Unfasten safety restraints and exit the prime mover.
9. Ensure that the hydraulic quick couplers are clean. Connect hydraulic lines for the blade to the prime
mover. Twist the collar of the quick couplers one quarter of a turn, to secure the hydraulic connection.
10. While the loader arms are lowered, visually inspect the attachment mechanism to ensure that it is
securely mounted.
11. Enter prime mover, fasten safety restraints and start prime mover.
12. Carefully raise the loader and cycle the rollback/dump cylinders to check clearances, that limiting
stops make proper contact and verify that all mounting procedures have been successfully completed.
Contact FFC for instructions if the limiting stops do not contact properly.
INSTALLATION
V-Snow Blade Installation