FFC V-Snow Blade, Руководство оператора

Страница: 15 / 47

15
OPERATION
Electro-Hydraulic Model
Adjusting V-Blade:
1. Start the prime mover at idle and raise the blade.
2. Adjust the blade to the desired angle (refer to “angling instructions”) and then lower to the ground.
3. Adjust blade until it is level to the ground ( refer to “leveling instructions”).
4. Increase prime mover engine rpm to operating speed.
Angling Instructions:
1. Press toggle switch and hold flow to move
one blade to the desired position.
2. Release switch and flow.
3. Pull toggle switch and hold flow to move
other blade to the desired position.
4. Release switch and flow.