Festo CPA VI Series, Руководство пользователя

Страница: 65 / 110

4.2 Locating faults
Malfunctioning
When you switch on the compressed air supply or test
the individual valves, you can learn the following about
the operating status of the pneumtic system:
Operating status of the
pneumatic system Valve position Error treatment when compressed
air supply has beeen switched off
Air comes out...
– at common line
connections
– at work line
connections
– between the modules
– Basic position
– Switch position
– Basic position
•
Check the tubing
•
Check the tubing
•
After switching on, regulate
external pilot air to 3 to 8 bar
Valve or pneumatic system
– does not react as expected
– does not react
– does not react
– Switch position
– Switch position
– Switch position
•
Check tubing
•
After switching on,
check operating pressure
(e.g. pressure zones)
•
Place locking manual override in
basic position
•
In the case of CPA valve terminals
with 3/2-way valves, check external
pilot air (or set as a factor of
working pressure)
•
Servicing required
•
Check regulator (apply pressure
>3 bar to regulator )
4. Commissioning
CPA... 9808A
4-11