Festo CPA VI Series, Руководство пользователя, Страница: 21 / 110

The table below shows the max. number of valve loca-
tions on the CPA valve terminals:
CPA valve terminal Max. no. of valve locations
IC
connection
MP
connection
CP
connection
AS-i
connection
For use only with manifold block EV1
(for valve plate with 1 single solenoid
valve) --
*)
22 16 4
For use only with manifold block EV2
(for valve plate with 2 single solenoid
valves or 1 double solenoid valve) --
*)
11 8 2
Max. no. of calve coils to be controlled 44 22 16 4
*) In the case of CPA valve terminals with IC connection, the max. number of valve locati
ons is limited by the tie rod to 22.
By means of the identification code, you can ascertain
the plates which are fitted on your CPA valve terminal.
This code is printed on the front of the valve plate.
Ident. code Pneumatic components
B
E
G
H
J
K
M
N
Valve location, 5/3-way, mid-position pressurized
Valve location, 5/3-way, mid-position exhausted
Valve location, 5/3-way, mid-position blocked
Valve location, two 3/2-way, control side 12 open
in basic position, control side 14 closed in basic
position
Valve location, 5/2-way, double solenoid
Valve location, 3/2-way, basic position blocked
Valve location, 5/2-way, single solenoid
Valve location, two 3/2-way, basic position open
1. System summary
CPA... 9808A
1-7