Ferrari 458 Spider Скачать руководство пользователя страница 139

Страница: 139 / 260

139

About your Vehicle

Warning

Before operating the hard top and while it is in motion, always

ensure that all children, persons and objects are a safe distance

away from the moving parts. In the event of danger, release the

hard top switch: all movement will stop immediately.

Warning

While the hard top is in motion, never place your hands, ﬁngers

or objects on the moving parts or on the windscreen cross

member.

Warning

DO NOT open the retractable hard top when the outside

temperature is below -10 °C (14 °F).

Warning

Before operating the hard top, make sure that the engine

compartment lid has been closed correctly. If the engine

compartment lid is open, a vehicle symbol appears on the left

TFT display that indicates that the lid is open together with a

special message.

Important note

We recommend closing the hard top when parking.

The conditions required for opening and closing the retractable

hard top are as follows:
- the ignition key must be in position

;

Important note

We recommend operating the hard top with the engine running.

- the engine compartment lid must be closed properly;
- the battery voltage must not be below 11 volts;
- the hydraulic system must not be overheated.
If one or more conditions are not met, the hard top cannot be

opened or closed and a message appears on the left TFT display.

Important note

Check that there is sufﬁcient vertical clearance to open the hard

top.

Содержание 458 Spider





































































































































































































































































Результаты поиска

Содержание 458 Spider

Отзывы:

Похожие инструкции для 458 Spider

Бренды по названию

Популярные бренды

Ferrari 458 Spider, Руководство пользователя

Результаты поиска

Содержание 458 Spider

Отзывы:

Похожие инструкции для 458 Spider

Бренды по названию

Популярные бренды