TECHNICAL DATA
Doweler
RF12/710
Input power
W
710
No-load speed
r.p.m.
18500
Distance between bits
mm
32
Inclination angle
0-90º
Perforation depth
mm
0-37
Maximum Ø for bits
mm
12
Minimum Ø for bits
mm
6
Approx. weight
Kg.
3.6
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the tool is used with care and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual.
Any other use
of the tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A On/Off switch (Fig.1 and 9)
B Auxiliary handle (Fig.1)
C Folding base (Fig.1)
D Frontal base (Fig.1)
E Depth gauge (Fig.1 and 5)
F Depth stop fixing wing nut (Fig.1 and 5)
G Folding base wing nut (Fig.1 and 7)
H Flip angle graduated scale (Fig.1)
I
Depth adjustment scale (Fig.5)
J Transparent frontal protection (Fig.6)
K Stepped stop (Fig.4)
L Flexibly adjustable pin (Fig.8)
M Motor cover (Fig.1 and 9)
N Bit fixing screw (Fig.2 and 3)
O Vertical stop wing nut (Fig.4 and 10)
P Pivot
(Fig.6)
Q Bit diameter template (Fig.6)
R Fixing bolt (Fig.6 and 8)
S Pivot support (Fig.6)
T Rack and pinion knob (Fig.4 and 10)
U Turret adjustment screw (Fig.4)
W Tool carrier (Fig.3)
X Stud adjustment screw (Fig.8)
Z Screwdriver (Fig.2 and 8)
EQUIPMENT
-
Operating instructions
-
Safety instructions
-
Warranty
SAFETY INSTRUCTIONS
Please see
“Safety Instructions”
manual, supplied
with this instruction manual.
For your personal safety, always connect the machine
to a mains supply protected by a differential and ther-
mal cutout switch, in accordance with regulations on
low-voltage wiring sitemaps.
Do not pierce the motor housing as this could damage
the double insulation (use adhesive labels).
Check the work area with a metal detector for hidden
wires, gas and/or water pipes.
Always unplug the machine before carrying out
work on it.
Always stop the machine by switching it off, not by
unplugging it.
WARNING!
Before each use, inspect the plug and
lead. Should they need replacing, have this done by an
official service centre.
Always keep the mains lead clear of the working range
of the machine.
Only plug the machine in when it is switched off.
Hold the machine firmly in both hands and in a
stable position.
Always work on a stable surface.
Make sure the vents are free when working with
dust. If they require cleaning, first unplug the ma-
chine, do not use metal objects and avoid damag-
ing internal parts.
When drilling in walls ceiling, or floor, take care to
avoid electric cables and gas or water pipes.
Never cut metallic items, for example nails.
Ensure that the item is free of foreign bodies.
Never put your hands in the shavings ejector when the
machine is in motion.
Keep work area clean and well lit.
Cluttered and
dark areas invite accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
Keep-children and bystanders away while oper-
ating a power tool.
Distractions can cause you to
lose control.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets wilt re-
duce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and re-
frigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi-
tions.
Water entering a power tool will increase the
risk of electric shock.
