Fayat DYNAPAC CC1400C Скачать руководство пользователя страница 67

Страница: 67 / 239

Machine description

4812164601_C.pdf

2023-01-05

Fig. Submenu, Regeneration
1. Activation of regeneration when this is
possible

Submenu - Regeneration
(D1803 (Tier 4f / Stage V) /
V2403-CR (Tier 4f / Stage V))

Regeneration is activated using the button (1) on the
right-hand side of the display.

Parked regeneration requires the following conditions
to be met:

- FNR/selector lever in neutral position

- Parking brake activated

- Engine temp >65°C (

Tier 4f

engine)

- Engine temp >50°C (

Stage V

engine)

- Engine speed in mode LOW

Fig. Regeneration required
5. Red warning symbol (Serious fault)
6. Yellow warning symbol
(Less serious fault)

Soot

1. When the symbol (1) is lit, regeneration needs to be
performed but parameters for automatic regeneration
are not met.

Level 1

If the symbol (1) on the display is lit with a solid light,
an

Automatic

regeneration is required.

For

Stage V

engines you can choose to perform a

Parked

regeneration in this mode, provided that the

conditions for regeneration are met.

Yellow

warning symbol (6) lights with a solid light.

No error codes are shown on this level.

Click “OK” to confirm the information and return to the
previous menu.

Level 2

If the symbol (1) on the display flashes an

Automatic

regeneration is required.

You can also choose to perform a

Parked

regeneration, provided that the conditions for
regeneration are met.

Yellow

warning symbol (6) lights with a solid light

and error codes can be launched with this.

Click “OK” to confirm the information and return to the
previous menu.

Содержание DYNAPAC CC1400C
















































































































































































































































Результаты поиска

Содержание DYNAPAC CC1400C

Отзывы:

Fayat DYNAPAC CC1400C, Инструкция по эксплуатации, Страница: 67 / 239

Результаты поиска

Содержание DYNAPAC CC1400C

Отзывы: