Fayat DYNAPAC CC1400C Скачать руководство пользователя страница 101

Страница: 101 / 239

Miscellaneous

4812164601_C.pdf

2023-01-05

Miscellaneous

Lifting

Fig. Articulation in the locked position
1. Locking arm
2. Locking pin
3. Locking stud
4. Locking lug

Locking the articulation

Articulation must be locked to prevent inadvertent
turning before lifting the roller.

Turn the steering wheel to the straight ahead position.
Enable the parking brake.

Pull out the locking pin (2) fitted with a wire, and pull
up/out the locking dowel (3).

Fold out the locking arm (1) and secure it to the upper
locking lug (4) on rear frame.

Fit the locking stub (3) in the holes through the locking
arm (1) and locking lug (4) and secure the stud in
position with the locking pin (2).

Содержание DYNAPAC CC1400C
















































































































































































































































Результаты поиска

Содержание DYNAPAC CC1400C

Отзывы:

Fayat DYNAPAC CC1400C, Инструкция по эксплуатации, Страница: 101 / 239

Результаты поиска

Содержание DYNAPAC CC1400C

Отзывы: