FastVision FastCamera13 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 52

FastVision FastCamera13 Скачать руководство пользователя страница 2

2

COPYRIGHT NOTICE

Copyright

©

2004 by FastVision, LLC.

All rights reserved. This document, in whole or in part, may not be copied, photocopied, reproduced,
translated, or reduced to any other electronic medium or machine-readable form without the express written
consent of FastVision, LLC.

FastVision makes no warranty for the use of its products, assumes no responsibility for any error, which
may appear in this document, and makes no commitment to update the information contained herein.
FastVision, LLC. retains the right to make changes to this manual at any time without notice.

Document Name:

FastCamer13 User’s Manual

Document

Number:

30002-50013

Revision

History: 1.0

January

20,2003

1.1 March

26,2003

1.2 March

30,2003

1.3

April 9, 2003

2.0 August

10,2004

3.0

August 13, 2004

4.0

August 17, 2004

Trademarks:

FastVision

®

is a registered trademark of FastVision, LLC..

Channel Link

™

is a trademark of National Semiconductor.

3M

™

is a trademark of 3M Company

MS DOS

®

is a registered trademark of Microsoft Corporation

SelectRAM

™

is a trademark of Xilinx Inc.

Solaris

™

is a trademark of Sun Microsystems Inc.

Unix

®

is a registered trademark of Sun Microsystems Inc.

Virtex

™

is a trademark of Xilinx Inc.

Windows

™

, Windows 95

™

, Windows 98

™

, Windows 2000

™

, Windows NT

™

, and Windows

XP

™

are trademarks of Microsoft

All trademarks are the property of their respective holders.

FastVision, LLC.

131 Daniel Webster Highway, #529

Nashua, NH 03060

USA

Telephone: 603-891-4317

Fax: 603-891-1881

Web Site:

http://www.fast-vision.com/

Email:

[email protected]

, or

[email protected]

«
1
2
3
4
...
»

Содержание FastCamera13





















































Отзывы:

Нет отзывов