- 38
Display
Programming Instructions
17) Machine Serial #
*=Next D=Back #=Yes
a) Press the #=Yes key to enter Menu
Option.
USE FOR
CHANGER SN?
d) Select 1 to assign this number to
coin changer. Select 2 if no.
1-YES
2-NO
d) Select option 1 or option2.
18) FILL / DISPENSE:
Allows coin count to be viewed for up to 5 coin changer
tubes. Coins may be dispensed from tubes 1 through 5.
Display
Programming Instructions
18) FILL / DISPENSE
*=Next
D=Back
#=Yes
a) Press the #=Yes key to enter Menu
Option.
Select Tube 1 to 5
# - EXIT
b) Enter any tube number: 1 to 5 to
dispense a coin and view coin count.
19) TOKENS & COUPONS
– This allows the machine to recognize coupons and
tokens as free vends when the Promotional feature is on. Item and price will be
recorded as a free vend in the DEX report
.
Display
Programming Instructions
19) TOKENS & COUPONS
*=Next
D=Back
#=Yes
a) Press the #=Yes key to enter menu
option.
Tokens / Coupons off
*= Change #=Accept
b) Press the “*” key to scroll between
“On” and “Off”.
c) Press the “#” key to accept selection.
20) FIELD TEST
– Enters a diagnostic mode to allow troubleshooting
assistance.
Display
Programming Instructions
20) FIELD TEST
*=Next
D=Back
#=Yes
a) Press the #=Yes key to enter Menu
Option.
Press # to Exit Test
b) Second line displays changes to the
position of switches and encoders.
c) Move any motor by pressing the
associated Service Keypad key.
d) Press “VAC” key. The Vacuum
Pump will turn on then slowly turn off.
Press # to Exit Test
S XXX E YYY
e) Press * key to inspect position
sensor values for Shoulder and Elbow
Sensors.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
