- 20
DEFROST FREEZER:
Depending on usage, temperature, humidity and maintenance practices, it may
eventually become necessary to defrost the freezer.
•
Press the “LOAD” button and then turn OFF and unplug the vendor.
•
Remove all the bins.
•
Place the product in an appropriate holding container.
•
Scrape off and remove ice from the freezer chest.
•
Drain freezer into a pan. Plugs are located on the inside floor and outside
front. A wet/dry vac or even a sponge may be used depending on the
volume of water.
•
Install bins, turn on the freezer and load product after the freezer reaches
operating temperature.
•
Test-vend each selection to verify accuracy. Edit locations as necessary.
Under most conditions, the Evolution Vendor may lose power for 12 hours
without compromising the quality of the product. If freezer temps reach unsafe
levels the health sensor will activate and the machine will be placed out of order.
Health Sensor Active Guidelines
When the machine is placed out of service with a Health Sensor Active, the
product must be inspected before the machine can be reset and placed back in
operation. Often only the top two or three items in each bin will have melted. If
the machine loses power for an extended period of time, the product must be
discarded and the freezer and bins will have to be cleaned before the machine
can be placed back in service.
Ice Cream and Frozen Food Machines:
The Health Sensor will go active and
the vendor will go out of service if the freezer maintains a temperature warmer
than 0°F / -18°C for a period in excess of 15 minutes.
Extreme Cold Machines
- The Health Sensor will go active and the vendor will
go out of service if the vendor maintains a temperature warmer than -25°F / -
32°C for a period in excess of 15 minutes.
Error Recovery -
When a machine is out of service, the error message may be retrieved by
pressing the “#” key. If the error is Health Sensor Active, the machine will not
accept money until the error has been reset and the machine has reached
operating temperatures.
VAC Keypad Security Feature:
The Service Keypad “VAC” button must be
pressed to release the Keypad Security Feature and allow normal use.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
