- 25
PROGRAMMING
INTRODUCTION
The machine comes from the factory without any preset selection numbers or bin
locations in memory. All information is entered during initial setup and
programming. Programming is menu driven and programming menus are
accessed in Service Mode. Simply scroll through the menus until the desired
function is reached. Once inside a menu function, the computer will prompt the
user to enter the required information.
The machine enters Service Mode every time the cabinet door is opened.
NOTES:
•
PRESS THE VAC BUTTON ON THE SERVICE KEYPAD TO DISABLE
THE SECURITY-LOCKING FEATURE (DISPLAY READS - “KEYPAD
IS LOCKED”) AND ENABLE USE OF THE CUSTOMER KEYPAD.
•
Once enabled, press the “*=Next” key on the Customer Keypad to scroll
through the Service Menu options. Press the “D” key to scroll in reverse
order.
•
If the machine is programmed in one location (for example in your
warehouse) and transported to another, it is important to re-level the
machine at the new location and perform test vends on each selection.
Edit bin locations as necessary.
•
Closing the Door
- When closing the machine door it is important to
NOT
over-tighten the T-Handle. Rotate the T-Handle until the Display
changes to, “Please Insert Money”, then turn the handle two additional
revolutions and push it in. Over-tightening the T-Handle may result in
damage to the T-Handle Assembly and may prevent normal operation.
SERVICE MENU OPTIONS:
1) CHANGE PRICE: Allows the prices to be changed.
2) SALES METERS: Allows sales data to be viewed.
3) EDIT SELECTION: Allows existing selections and bin positions to
be edited. Allows bins to be added to existing selections.
4) CREATE SELECTION: Allows a selection to be created.
5) DELETE SELECTION: Allows a selection to be deleted.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
