Fast 8300, Руководство по эксплуатации

Страница: 24 / 42

8300 Liquid Fertilizer Applicator 23 FAST AG Solutions
Your machine is equipped with automatic controller.
Review controller manual to become familiar with
applicator settings and control.
Optional Wheel Speed Sensor
Verify speed sensor on left wheel hub is set with a gap
of 1/8 inch (3mm) or the thickness of a nickel. Sensor
supplies a signal to controller for determining ground
speed and allows controller to vary application rate
appropriate for speed.
WARNING
Prevent serious injury or death.
Check chemical or fertilizer MSDS for
proper handling instructions.
Toxic chemicals can enter the body by
breathing, spray or contact with bare skin.
Do not take a chance with your health and
safety.
3.9 Field Operation
Read and understand Operator’s Manual and all
safety signs before using.
Lower machine to the ground, place all controls
in neutral, stop engine, set park brake, remove
ignition key, and wait for all moving parts to
stop before servicing, adjusting, repairing or
unplugging.
Install and secure all guards and shields before
starting or operating.
Keep hands, feet, hair and clothing away from
all moving and/or rotating parts.
Do not allow riders on the applicator or tractor
during operation or transporting.
Clear area of all bystanders, especially
children, before starting or filling with chemical
or fertilizer.
Read chemical or fertilizer manufacturers
warnings, instructions and procedures before
starting and follow them exactly.
Do not breathe, touch or ingest chemicals or
fertilizer. Always wear protective clothing and
follow safe handling procedures.
Stay away from wings when folding or
extending wings. Keep others away.
Clean reflectors, SMV and lights before
transporting.
Attach securely to towing unit using a hardened
pin with a retainer and a safety chain.
Do not exceed a safe travel speed.
NOTICE
Prevent Damage To Equipment
Verify main tank is empty before
transporting on road.
Use hazard flasher on tractor.