background image

8300 Liquid Fertilizer Applicator                                    8                                               FAST AG Solutions

2. Safety

 

YOU

  are  responsible  for  the 

SAFE

  operation  and

maintenance  of  your  FAST  AG  Solutions  Liquid
Fertilizer  Applicator.  YOU  must  ensure  that  you  and
anyone else who is going to operate, maintain or work
around the Liquid Fertilizer Applicator be familiar with
the  operating  and  maintenance  procedures  and
related 

SAFETY

 information contained in this manual.

This  manual  will  take  you  step-by-step  through  your
working  day  and  alerts  you  to  good  safety  practices
that  should  be  adhered  to  while  operating  the
applicator.

Remember, 

YOU

  are  the  key  to  safety.  Good  safety

practices  not  only  protect  you  but  also  the  people
around  you.  Make  these  practices  a  working  part  of
your  safety  program.  Be  certain  that 

EVERYONE

operating  this  equipment  is  familiar  with  the
recommended 

operating 

and 

maintenance

procedures  and  follows  all  the  safety  precautions.
Most accidents can be prevented. Do not risk injury or
death by ignoring good safety practices.

Applicator owners must give operating instructions to
operators  or  employees  before  allowing  them  to
operate  the  unit,  and  at  least  annually  thereafter  per
OSHA regulation 1928.57.

The most important safety device on this equipment is

SAFE

 operator. It is the operator’s responsibility to

read  and  understand 

ALL

  Safety  and  Operating

instructions  in  the  manual  and  to  follow  these.  All
accidents can be avoided.

A  person  who  has  not  read  and  understood  all
operating  and  safety  instructions  is  not  qualified  to
operate the machine. An untrained operator exposes
himself  and  bystanders  to  possible  serious  injury  or
death.

Do  not  modify  the  equipment  in  any  way.
Unauthorized  modification  may  impair  the  function
and/or  safety  and  could  affect  the  life  of  the
equipment.

Think SAFETY! Work SAFELY!

2.1 Safety Alert Symbol And 
Signal Words

This symbol means 
ATTENTION! BECOME 
ALERT! YOUR SAFETY IS 
INVOLVED! 

The  level  of  risk  is  indicated  by  the  following  signal
words: 

DANGER

 

DANGER - Indicates a hazardous 
situation, which, if not avoided, WILL 
result in death or serious injury.

WARNING

 

WARNING - Indicates a hazardous 
situation, which, if not avoided, could 
result in death or serious injury.

CAUTION

 

CAUTION - Indicates a hazardous 
situation, which, if not avoided, could 
result in minor or moderate injury.

NOTICE

 

NOTICE 

- Indicates a situation that could 

result in damage to the equipment or other 
property.

Содержание 8300











































Отзывы: