Fast 8300, Руководство по эксплуатации

Страница: 23 / 42

8300 Liquid Fertilizer Applicator 22 FAST AG Solutions
7. Connect hydraulics:
•a. Use a clean rag or paper towel to clean dirt
from couplers on hose ends and tractor couplers.
WARNING
Prevent serious injury or death.
Relieve hydraulic system pressure before
connecting hydraulic hoses.
Relieve pressure in hydraulic system.
Route hoses over hitch and connect
hoses to tractor couplers. Verify couplers
are securely seated. Be sure to provide
slack for turning.
•SCV1: Connected to tool bar lift cylinders and
wing kick.
•SCV2: Connected to inner wing extend/fold cylin-
ders.
•SCV3: Connected to outer wing extend/fold cylin-
ders.
•SCV4: Connected to hydraulic pump.
8. Route electrical lines over hitch and connect to
tractor electrical connectors. Be sure to provide
slack for turning.
9. Turn crank handle to raise jack. Pull pin (A) out
and pivot jack frame forward into its stowed posi-
tion. Insert pin in hole (B) to secure jack.
10. Reverse procedure when unhooking.
3.8 Machine Setting
Applicator is equipped with a pump that meters out a
quantity of fluid and sends it through distribution line to
nozzles mounted along the tool bar. The pump can be
set to give a wide range of application rates.
Always be aware of the size of the field to be covered,
the application rate and the amount of liquid in the
tank. If there is liquid left over or you run short, check
the application rate. Reset if required or verify tank
volume.
Always check that liquid comes out of each nozzle at
the start of the season and each day by engaging the
hydraulic circuit momentarily. A nozzle that does not
work properly will skew your application efficiency.
Table 1: HYDRAULIC HOSE KEY
COLOR DESCRIPTION OF USE
Red Pump Pressure
Yellow Pump Return
Blue Main Fold Pressure (Lower) - run
in constant flow
Green Main Fold Return (Raise)
Gray Main Lift /Wing Kick Pressure
(Lower)
Orange Main Lift /Wing Kick Return (Raise)
Purple Flip Fold Pressure (Lower)
Brown Flip Fold Return (Raise)