Fast 8300, Руководство по эксплуатации

Страница: 12 / 42

8300 Liquid Fertilizer Applicator 11 FAST AG Solutions
2.6 Transport Safety
1. Read and understand ALL information in Opera-
tor’s Manual regarding procedures and SAFETY
when operating applicator in field and/or on road.
2. Check with local authorities regarding applicator
transport on public roads. Obey all applicable laws
and regulations.
NOTICE
Prevent equipment damage.
Verify main tank is empty before
transporting on road.
3. Always travel at a safe speed. Use caution when
making corners or meeting traffic.
4. Make sure the SMV (Slow Moving Vehicle)
emblem and all lights and reflectors that are
required by the local highway and transport
authorities are in place, are clean and can be seen
clearly by all overtaking and oncoming traffic.
5. Daybreak and dusk are particularly dangerous
and pilot vehicles are recommended.
6. Be sure applicator is properly connected to towing
vehicle and a retainer is used through drawbar
pin. Always attach a safety chain between frame
and towing vehicle.
7. Keep right and yield right-of-way to allow faster
traffic to pass. Drive on road shoulder, if permitted
by law.
8. Do not exceed 20 mph (32 km/h). Reduce speed
on rough roads and surfaces.
9. Always use hazard warning flashers on tractor
when transporting unless prohibited by law.
10. Stay away from overhead power lines during
transport. Electrocution can occur without direct
contact.
11. Lower machine to ground, place all controls in
neutral, stop engine, set park brake, remove igni-
tion key, and wait for all moving parts to stop
before servicing, adjusting, repairing or unplug-
ging.
12. Read chemical manufacturers warnings, instruc-
tions and procedures before starting and follow
them exactly.
13. Post Poison Control Emergency telephone num-
ber for your area on applicator before using Agri-
cultural chemicals.
14. Have container label handy when seeking medical
attention.
15. Review safety related items with all personnel
annually.