Fast 8300, Руководство по эксплуатации

Страница: 32 / 42

8300 Liquid Fertilizer Applicator 31 FAST AG Solutions
4. Service And Maintenance
Review the Operator’s Manual and all safety
items before working with, maintaining or
operating the applicator.
Lower machine to the ground, place all controls
in neutral, stop engine, set park brake, remove
ignition key, and wait for all moving parts to
stop before servicing, adjusting, repairing or
unplugging.
Follow good shop practices:
•Keep service area clean and dry.
•Be sure electrical outlets and tools are prop-
erly grounded.
•Use adequate light for the job at hand.
Before applying pressure to a hydraulic system,
make sure all components are tight, hoses and
couplings are in good condition.
Relieve pressure from hydraulic circuit before
servicing or disconnecting from tractor.
Keep hands, feet, clothing and hair away from
all moving and/or rotating parts.
Clear the area of bystanders, especially
children, when carrying out any maintenance
and repairs or making any adjustments or
filling.
Place stands or blocks under the frame before
working beneath the machine or when
changing tires.
Be sure all guards are in place and secured
when maintenance work is completed.
Use only tools, jacks and hoists of sufficient
capacity for the job.
4.1 Service
4.1.1 Fluids And Lubricants
Grease:
Use an SAE multi-purpose high temperature
grease with extreme pressure (EP) performance.
Also acceptable is an SAE multi-purpose lithium
base grease.
Storing Lubricants:
Your machine can operate at top efficiency only if
clean lubricants are used. Use clean containers to
handle all lubricants. Store them in an area
protected from dust, dirt, moisture and other
contaminants.
4.1.2 Greasing
Refer to Section 4.1.1 for recommended grease. Use
Maintenance Checklist provided to keep a record of all
scheduled maintenance.
1. Use only a hand-held grease gun for all greasing.
2. Wipe grease fitting with a clean cloth before
greasing, to avoid injecting dirt and grit.
3. Replace and repair broken fittings immediately.
4. If a fitting will not take grease, remove and clean
thoroughly. Also clean and lubricant passageway.
Replace fitting if necessary.