Fast 8300, Руководство по эксплуатации

Страница: 25 / 42

8300 Liquid Fertilizer Applicator 24 FAST AG Solutions
Stay away from overhead power lines when
folding or extending the wings and during
transport.
Before applying pressure to the hydraulic
system, make sure all components are tight and
that hoses and couplings are in good condition.
Review safety instructions before operating
machine.
Set machine and desired application rate for operating
conditions. Time spent setting machine and
application rate before starting will result in a quality
job.
1. Attach applicator to machine (see Section 3.8).
2. Review and follow pre-operation checklist.
3. Read and follow chemical/fertilizer manufacturers’
instructions.
4. Set applicator so you know exactly how much liq-
uid is being applied (see Section 3.8). Incorrect
application rates can dramatically affect seed ger-
mination and yields. Set at start of season or when
changing application rate.
5. Transport machine to working area.
6. Open machine to field position (see Step 14).
7. Starting:
•Set engine RPM at rated speed.
•Place hydraulic motor control lever in detent.
•Start into field.
•Lower the tool bar into ground.
•Turn on boom sections
8. Stopping:
•Turn off boom sections
•Place hydraulic motor control lever in float posi-
tion and lift tool bar out of ground.
•Stop forward motion of machine, place hydraulic
lever in its off position
•Reduce engine RPM to low idle.
9. Emergency stop:
•If an emergency arises, shut engine off to stop
machine or stop forward motion. Refer to Step 7
when restarting the machine.
10. Filling:
It is recommended that machine be transported to
the field empty and filled in the field.
•To fill tank:
•Pull up to tender truck or drive truck to machine.
•Connect transfer hose to bottom fill line (A).
•Start pump on tender truck and open valve on
input line.
•Pump until tank is filled to desired level. Do not
over-fill.
•Close input valve and stop pump on tender
truck.
•Remove and stow fill line.
•Install and fasten input line covers
WARNING
Prevent serious injury or death.
Check chemical or fertilizer MSDS for
proper handling instructions.
Toxic chemicals can enter the body by
breathing, spray or contact with bare skin.
Do not take a chance with your health and
safety.