Fast 8300, Руководство по эксплуатации

Страница: 29 / 42

8300 Liquid Fertilizer Applicator 28 FAST AG Solutions
20. System Screen:
The liquid system is equipped with a screen in
suction line to remove dirt and impurities. Close
valve, remove screen and wash with clear water
on a daily basis. Clean liquid is required to prevent
nozzle plugging.
21. Sump:
WARNING
Prevent serious injury or death.
Check chemical or fertilizer MSDS for
proper handling instructions.
Toxic chemicals can enter the body by
breathing, spray or contact with bare skin.
Do not take a chance with your health and
safety.
Remove plug on end of screen canister to drain
tank at the end of each season.
22. Add only the amount of liquid to the tank that is
required for the job. Excess liquid must be
removed from the machine at the end of the sea-
son to prevent corrosion of metal parts.
Emptying at the end of each day is also
recommended to prevent corroding over night.
Remove all excess liquid from the machine
through the plug on the bottom of the screen
canister.
Note: Always turn sump valve off
whenever working on liquid circuit
components to isolate the liquid in tank.
23. Drive at a comfortable speed whenever operating
in field. Operating too fast for conditions can
cause coulter depth to vary and lead to inconsis-
tent application efficiencies.
24. To fold toolbar for transporting:
•Engage tractor remote #1 to fully raise center
section.
•Remove lock out pins.
•Engage tractor remote #3 to fold outer flip wings
to transport position.
•Engage remote #2 to fold main wings to transport
position. With the toolbar fully raised, place trans-
port brace or cylinder stops on main lift cylinder
rams.
•Install transport pins at main wing hinge area.