Manual
KOMPAKTOMAT K1250PS | K1570PS
20
│
46
CIRCUIT B – the circuit for the control of transportation bolts together with auxiliary wheels. Hydraulic circuit
designated with WHITE rings. This hydraulic circuit does not need to be turned on when working in the field.
DRAWING-OUT PISTON = FOLDING INTO THE TRANSPORT POSITION
By pressurising this circuit branch, the bolts lift the side frames into the transport position and the
auxiliary wheels are folded to the frames into the transport position when the side frames have been
lifted.
PISTON RETRACTION = UNFOLDING INTO THE WORKING POSITION
By pressurising this circuit branch, the auxiliary wheels are unfolded from the frames. Once unfolded,
the bolts start to open and lower the side frames.
CIRCUIT C – the circuit for the control of the supporting leg of the chassis. Hydraulic circuit designated by
BLACK rings. This hydraulic circuit does not need to be turned on when working in the field.
DRAWING-OUT PISTON = SETTING THE TRANSPORT POSITION
The supporting leg stands on the ground when this circuit branch is pressurised.
PISTON RETRACTION = SETTING THE WORKING POSITION
The supporting leg is lifted from the ground when this circuit branch is pressurised.
CIRCUIT E – the circuit for controlling the position of the track cultivators behind the chassis wheels. Hydraulic
circuit designated by MULTI-COLOUR rings. This hydraulic circuit must always be turned on when working in
the field.
Attention! Do not manipulate with this circuit when the machine is standing on hard surface (asphalt,
concrete) as it could damage the track cultivators or the surface.
DRAWING-OUT PISTON = SETTING THE WORKING POSITION
Hydraulic circuit designated by a YELLOW + GREEN ring. The track cultivators are set into the working
position when this circuit branch is pressurised.
PISTON RETRACTION = SETTING THE TRANSPORT POSITION
Hydraulic circuit designated by a RED + BLUE ring. The track cultivators are set into the transport
position when this circuit branch is pressurised.
CIRCUIT D – the circuit for folding and unfolding the external 1.5m side frames. Hydraulic circuit designated by
YELLOW rings. This hydraulic circuit is only installed in K1570PS.
This hydraulic circuit does not need to be turned on when working in the field.
UNFOLDING SIDE 1.5m FRAMES INTO THE WORKING POSITION
The external side frames are open into the working position when this circuit branch is pressurised.
FOLDING SIDE 1.5m FRAMES INTO THE TRANSPORT POSITION
The external side frames are open into the transport position when this circuit branch is pressurised.
OP
TI
ONAL E
QUI
PM
EN
T O
F T
H
E M
A
CH
INE
HYDRAULIC CIRCUIT FOR FRONT LEVELLER POSITION
CONTROL
- ONE BLUE RING
Pressurizing this branch of the circuit brings the leveller up
from the surface.
Flow limiters
reducing the speed
of the piston-rod
operation are used
in the circuit.
The precise position
can be found in the
Spare Parts
Catalogue.
HYDRAULIC CIRCUIT FOR FRONT LEVELLER POSITION
CONTROL
- TWO BLUE RINGS
Pressurizing this branch of the circuit recesses the leveller
to the surface.
HYDRAULIC CIRCUIT FOR SHARE WORKING DEPTH
CONTROL
- ONE GREEN RING
Pressurizing this branch of the circuit brings shares out of
the processed profile.
HYDRAULIC CIRCUIT FOR SHARE WORKING DEPTH
CONTROL
- TWO GREEN RINGS
Pressurizing this branch of the circuit recesses shares into
the processed profile.
