Manual
KOMPAKTOMAT K1250PS | K1570PS
32
│
46
Without the manufacturer´s prior consent, do not interfere with the hydraulic circuit components in any
way!
9.4.1
MCD-mechanical depth setting
Standardly, the depth is set mechanically by turning the handle manually. Each working section of the
machine is controlled individually.
The depth setting is increased by turning the handle anticlockwise – red arrows in the picture.
The depth setting is decreased by turning the handle clockwise – white arrows in the picture.
There is an indicator near the handle that shows that all the sections are set at the same depth.
9.4.2
HD-hydraulic depth setting
The depth is set from the tractor driver’s position. All working sections are controlled at the same time.
The depth setting increases when the piston-rods are drawn out – red arrows in the picture.
The depth setting decreases when the piston-rods are drawn in – white arrows in the picture.
There are indicators located in spots visible from the tractor that show that all the sections are set at the
same depth.
9.5
Adjusting the leveller height behind shares
Perform the adjustment of the levellers when the machine is unfolded in the working position and
standing still.
The machine must rest on the working sections.
When adjusting the position of the levellers, always observe generally valid labour safety regulations.
o
The leveller behind the shares is used for even spreading of the loosened soil behind the last
row of sweeps in front of the rear roller.
o
Set the height of the leveller “V” according to the current soil conditions.
o
Correct position of the leveller affects the resulting quality of processing.
o
The correctly set leveller ensures that no tracks after the last row of shares are visible.
o
The position of the leveller is secured by inserting a chain loop into the hole on the supporting
frame. The chain is secured by inserting a companion part and a safety pin.
