Farmet KOMPAKTOMAT K1250PS, Руководство по эксплуатации

Страница: 39 / 46

Manual
KOMPAKTOMAT K1250PS | K1570PS
39
│
46
13. MAINTENANCE AND REPAIRS

When making any repairs, strictly observe the labour-protection rules mentioned in Chapters A through N
/ Pages 4 through 11.

After first 20 hours and before each use, check that all screw and other assembly joints are tightened well.

Lubricate the machine in the lubrication points according to the lubrication chart.

Check the wear and tear of the working tools from time to time. If worn and torn excessively, replace them
by new ones.

Setting, cleaning and lubricating operations may only be carried out at rest. The tractor engine must be
turned off and secured against starting.

If the work is to be done on the lifted machine, suitable supports placed in marked points or other suitable
points must be used.

When setting, maintaining or repairing the machine, secure reliably those parts of the machine that could
cause accidents by falling or moving.

If hoisted with a suspension lifting mechanism (a crane), hang the machine in the marked points only.
These points are marked with the "chain".

Replace the worn ploughshares either when the machine is folded into the transport position or directly in
the field, if necessary. For that you need to tip the working section so that it rests on the auxiliary wheels
(see Fig. 30, 31).
Fig. 30 – Transport position for ploughshare section replacement Fig.31 – Working section for ploughshare replacement
in the field

When a defect or damage appears, turn off the tractor engine immediately, secure it against undesired
start up and motion. Only then can you start to repair it.

Use solely the original spare parts for repairs. Use the appropriate tools and protectives.

If you are about to arc-weld and if the machine is coupled with the tractor, disconnect the alternator and
accumulator feeding cables.

Check tire pressure and tire condition regularly. Tire repairs and replacements should be made in a
specialized workshop.

Keep the machine clean.
The section must be
supported to
prevent an
unprompted fall
during any
manipulation or
repair