Manual
KOMPAKTOMAT K1250PS | K1570PS
22
│
46
6.
AGREGATION WITH THE TRACTOR
For safe aggregation, observe the regulations given in Chapter E / Page 5 to 6.
Only aggregate the machine with a tractor in the lower hitch with a
50 mm or
70 mm bolt or in K80
tow ball, even when the machine is just being transported (see Fig.5).
The machine may only be aggregated with a tractor with an output intended for such use according to
Chapter No. 2.
As additional load to the tractor (counterweight) only the weights prescribed by the manufacturer should
be used.
Only aggregate the machine with a tractor equipped with single-circuit two-hose brake.
Fig. 5 – Connecting the machine with the lower tractor hitch
7.
PROCEDURE FOR UNFOLDING INTO THE WORKING POSITION
7.1
It is necessary to connect the machine with the lower hitch of the tractor with a
50 mm bolt for safe
unfolding and folding. When handling and unfolding the machine, the tractor hitch is loaded with
vertical force of 25 kN up and 35 kN down!!! Thus the tractor hitch must meet this requirement!
