Manual
KOMPAKTOMAT K1250PS | K1570PS
28
│
46
9.1
Adjusting the position and depth of the track cultivators
The tractor track cultivator position can be adjusted either by height or length, as needed.
When adjusting the track cultivator position, always observe generally valid labour safety regulations.
Correct position of the track cultivator affects the resulting quality of processing.
The track cultivators are located on the beams of the pulling fork. The drawbar beam for attaching track
cultivators is telescopic.
The cultivator can be moved on the beam so that it loosens the compacted tractor wheel tracks.
Lengthwise setting of the cultivators is performed by releasing the nuts of the screws and moving the
cultivators along the beam into the position behind the tractor wheels so that they loosen the
compacted tractor tracks.
Setting the depth of the cultivator is performed by removing the pin and moving the cultivator in the
holder. Before setting the depth of the cultivators, set the machine in the position when the cultivators
are not loaded.
STANDARD DRAWBAR
BEAM EXTENSION
Min=830mm
Max=1230mm
CULTIVATOR VERSIONS (p. 12)
CA
CC
