Manual
KOMPAKTOMAT K1250PS | K1570PS
17
│
46
3.
OPERATIONAL SAFETY RULES
Before you take over the machine, please check that is has not been damaged during transportation and
that all its parts have been supplied according to the delivery note.
Before setting the machine to work, please read these Operating manual carefully.
Before starting to work, please acquaint yourself with the overall functioning of the machine and its
controls.
Please observe not only the rules of these Manual but also general labour-protection, fire-protection
and environment-protection regulations as well as transportation safety rules.
The machine may only be operated by a person, which meets requirements of the item A.3 above.
Before setting the machine to work, please check its condition. In case of showing any signs of
damaging, the machine must not be operated.
When aggregating the machine with the tractor, follow the Instruction given in Chapter E/Page 5 to 6.
Execute aggregation of the machine with the tractor on an even and compact surface.
Before uncoupling the tractor and the machine in the transport position, the machine must be secured
against accidental and undesirable unfolding, i.e. the folded lateral frames must be locked by the
connecting bar.
When working on slopes, observe the slope accessibility of the whole TRACTOR-MACHINE set.
It is strictly forbidden to unfold or fold the machine on slopes – see the P100H labour-protection (safety)
sticker located on the machine.
Before starting up the tractor, check that there is no unauthorized person within the operating reach of
the set and sound the horn.
Operators should pay attention to any person's not approaching the machine during operation in the
field.
It is forbidden to dismantle the parts of the machine hydraulic system that are under pressure.
Hydraulic oil penetrating the skin under high pressure causes serious injuries. Should this happens, call
the doctor immediately.
4.
ROAD TRANSPORT RULES
The transport speed of the tractor with the machine should not exceed 25 km p.h.
When transporting the machine on public roads, follow the instruction given in Chapter G/Page 6.
When transporting the machine on roads, the operator(s) should observe the applicable law and
regulations including those which specify the tractor axle load depending on the transport speed.
When transporting the machine on ground communications, the side frames must be secured by the
connecting rod and the machine must be fitted with safety shields with a functional light set.
Considering the size of the machine, the operator transporting the machine must be very careful and
considerate to other road users.
