F&P Airvo 3, Руководство пользователя, Страница: 23 / 216

A - 20 | Airvo 3 - USER MANUAL
English
Adjust supplementary oxygen (optional)
Warning
Use continuous SpO
2
monitoring on patients who would desaturate
signifi cantly if their oxygen supply is disrupted.
Oxygen connected to the high-pressure inlet port (HPO)
1. Tap the FiO
2
tile to open the Titrate FiO
2
screen.
2. Use the + / – buttons or slider to select the desired FiO
2
.
3. Tap Confi rm to apply the change and return to the
Home screen. Tap Cancel to discard any changes.
The Airvo 3 will automatically adjust oxygen fl ow to maintain the selected
FiO
2
.
Oxygen connected to the low-pressure inlet port (LPO)
The Airvo 3 does not directly control FiO
2
.
Use an external fl owmeter to adjust FiO
2
to the prescribed level.
The oxygen tile displays measured FiO
2
.
Note
It may take a few minutes for the oxygen measurement to stabilize.
The external fl owmeter will need to be readjusted following changes to Airvo 3 target fl ow.
High FiO₂ alarm
Clinicians may confi gure a High FiO
2
alarm to discourage the use of high FiO
2
values in particular clinical environments. See the Airvo 3
Technical Manual for setup details.
If the alarm is enabled, the alarm threshold is displayed on the Target FiO
2
screen.
1
3
2
2
7
L/min
PATIENT INTERFACE
2 3 4 5 6 7 8 9 10 15 20 25 ... 50 55 60 65 70
Optifl ow
Junior 2
OJR414 M
2 7
OJR416 L
2 20
OJR418
XL
2 25
OJR520 XXL
10 50
Optifl ow +
Interfaces
OPT942/OPT962/OPT1042 (S)
10 60
OPT944/OPT964/OPT1044
(M)
10 70
OPT946/OPT966/OPT1046
(L)
10 70
Trache OPT970
10 60
Mask Adapter
OPT980
10 60