FaderMate Master Control Unit, Руководство по фитингам

Страница: 9 / 36

FaderMate will only fit a console which can accommodate this extended fader body. The
parts which are most likely to foul the motorised fader are
• The first potentiometer/switch in the channel strip (at the top of the fader)
• The console ‘buffer rail’ (at the bottom of the fader)
Figure 3.1.2 illustrates these space constraints in a typical console.
Figure 3.1.2 – Typical Motorised Fader Space Constraints
3.2 Fader Cables
The faders supplied as part of the standard FCU kit are fitted with cables 10cm in length. If
required to accommodate mechanical peculiarities of a particular console, you may
request any number of your motorised faders to be fitted with an alternative longer cable of
approximate length 33cm.
Please see section 3.5 (Planning Your Installation) for more details about the
circumstances under which it is appropriate to request faders with longer interface cables
when submitting an order.
9