FaderMate Master Control Unit, Руководство по фитингам

Страница: 33 / 36

When you have all motorised faders
• Attached to appropriate console metalwork and;
• Connected to the FCU by the interface connectors
reassemble the console.
TIP: It may be worth placing the faders into position in the console but not (initially)
screwing the metalwork into the chassis in case you need to disassemble the
system to check the connections after doing a basic system test.
It is extremely important to check that there is no risk of stray pieces of conducting material
(e.g. old, unused wires with stripped ends) causing a short circuit on any FCU boards.
It is also highly recommended that insulating tape is used to prevent any system boards or
bare wires from making contact with any of the console’s internal wiring or unpainted parts
of its chassis.
33