FaderMate Master Control Unit, Руководство по фитингам

Страница: 32 / 36

4.9 Fitting and Connecting the Motorised Faders
Each motorised fader must be

Fitted to the appropriate console metalwork

Connected to the FCU which will control it
Figure 4.9.1 is a photograph of the standard Alps moving fader fitted with a custom ribbon
cable as supplied in the FCU kit.
Figure 4.9.1 - FaderMate Standard Motorised Fader
First, screw each motorised fader to the appropriate faceplate using the mounting screws
that have been removed from the original faders.
To connect a motorised fader to the FCU, the IDC interface connector on its ribbon cable
must be plugged in to the appropriate FADER n connector on as shown in Figure 4.9.2.
Figure 4.9.2 - Connecting a Fader to the FCU
32