FaderMate Master Control Unit, Руководство по фитингам

Страница: 15 / 36

Figure 3.4.2 – Data Interface Cable DB25 Connector Dimensions
Figure 3.4.3 shows a length of the supplied power cable.
Figure 3.4.3 – Power Cable
The two possible ways of getting the cables inside the console are:

Cutting/drilling panels and grommeting the hole(s)

Feeding the cables through existing gaps in the metalwork
Note that the data interface cable is 2 metres long. It is therefore not possible to locate the
MCU further than this distance from the console.
Dimensions for the daisychain data cable used to connect together all of the FCUs in the
system are shown in Figure 3.4.4.
15