FaderMate Master Control Unit, Руководство по фитингам

Страница: 35 / 36

4.11 System Calibration
NOTE: Only perform this step after the system has been completely installed in the
console.
If you have reached this stage, congratulations! Your FaderMate system has been
physically installed.
However, prior to using FaderMate, it is necessary to calibrate the system. Failure to
perform this step may result in poor performance such as

The motorised faders hum or rattle when stationary

Touch sensing does not operate correctly

It is not possible to cause the DAW fader to go to -inf or full-scale

The motorised faders never reach the extremes of their travel
Calibration is performed using the FaderMate GUI control panel software. Full instructions
for performing initial calibration routines are given in the FaderMate GUI User Guide .
Both of these items are available for download at http://fadermate.co.uk/downloads .
5 Using the Product
Full instructions for connecting FaderMate to a computer and using the system are given
in the FaderMate Product Manual available from http://fadermate.co.uk/downloads .
35